We provide product and system performance data that satisfies the "fit for purpose" documentation requirements of the Australian Building Code (BCA), the National Construction Code (NCC) and Australian Paint Approval Scheme specifications (APAS
The collateral damages include thousands AS 4654.1 Waterproofing Membranes for External Above Ground Use Testing of tons of wasted building materials, increases in insurance rates, non-renewal of policies, lost productivity, and injured reputations. Every year, building owners, development teams, and their insurers spend hundreds of millions of dollars litigating and repairing water intrusion problems. By doing this Durotech has become the most environmental construction chemical supplier in Australi
Dunlop Pro Rapid Waterproofing
• Multi-purpose use, suitable for all under tile applications. A waterproofing bond breaker is designed AS 4654.1 Waterproofing Membranes for External Above Ground Use Testing to allow normal building movement to be accommodated by a waterproofing membrane. We also have cementitious 2 part membranes that eliminate the need for reinforcement layers, thus saving application time and mess. Depending on the area to be waterproofed, our range includes ready-to-use acrylic and polyurethane membranes that can be applied directly out of the pai
TREMseal Bandage is a TPE flexible sealing tape, is thin and extra-tough elastic strip with considerable longitudinal and lateral extension. TREMproof Torch 4000M is a 4mm thick, APP modified bituminous torch applied waterproofing membrane which is polyester spunbond, with glass filament reinforcement. TREMproof 260 is a polymer-enhanced, single component, fluid-applied, bitumen emulsion, waterproofing membrane.
Tremco Xylol
TREMproof Torch Bitumen Primer is a solvent based modified bitumen primer designed to assist with adhesion of the TREMproof Torch and TREMproof 560A membranes to the substrate. TREMproof 250GC is a rapid curing, high solids, low VOC, moisture cure modified polyurethane waterproofing membrane that can be applied to "Green" (24 hour old) concrete. Polyurethane membranes cure to form an elastic waterproof seal that is free of seams to prevent moisture or water to leach into the surface. Cementitious waterproofing membrane has great adhesion to concrete, cement rendered masonry and fibre-cement sheet, and provides a uniform colour and texture similar to mortar. Vulkem NEM Plus is an Australian made single component, moisture curing, high tensile strength and tough curing polyurethane membran
The low voltage Vertical Surface Scanning roller listed under the guide for testing vertical substrates works by moistening the roller sleeve as AS 4654.1 Waterproofing Membranes for External Above Ground Use Testing the operator rolls the testing tool up the substrate forcing the water before it into any breaches. Given Vector Mapping requires a constant flow of water over a substrate, vector mapping is not able to test vertical substrates – even with an additive in the water to create a film on a given vertical surface, the accuracy is still not reliable. In areas where there are multiple breaches, further testing needs to be undertaken each time until no more breaches are identified. If there are only puddles on the surface, then the circuit would be incomplete resulting in missed breache
Request a free quote today and ensure your surfaces meet national slip resistance requirements. Whether you need wet pendulum testing, on-site slip resistance measurements (AS 4663), or lab testing to AS 4586, our expert technicians deliver accurate, fast, and fully certified reports. At Zerofal, we make the process of completing slip testing for your property easy and fuss free. "I highly, and unequivocally, recommend Zerofal to anyone looking for a professional solution to their slip testing needs
Seams on sheet membranes are also difficult for this method to accurately test as the thickness at the seam is doubled; high voltage current cannot travel laterally through a seam defect. However, not all ELD testing equipment can find breaches on vertical substrates, multiple horizontal breaches in a single test or test semi-conductive coatings – i.e. membranes such as Black EDPM, Black Butynol or polyurethanes tinted with Carbon black. ELD works by creating an electrical field between the membrane surface and a conductive deck or substrate [ie Concrete] which is earthed to the building.
Adhesion Testing
D) Requires temporary dams to be installed to partition off individual wet areas from non-wet areas in buildings, AS/NZS 4858 is the primary Australian standard that relates to the physical performance properties of waterproofing membranes specified for use in wet areas such as bathrooms, kitchens, laundries and wet rooms, to prevent water ingress and protect structures from moisture damage. The thickness readings are obtained by measuring the time taken for the ultrasonic signal to propagate from the probe to the coating/substrate interface and back. Independent Testing Australia (ITA) is equipped with specialised apparatus to test materials and provide data to coating manufacturers, specifiers, builders and waterproofers to determine product suitability for use in the Australian construction industry and satisfy documentation requirements of the Australian Building Code (BCA), the National Construction Code (NCC) and Australian Paint Approval Scheme specifications (APAS). The EFVM® leak detection system makes flood testing waterproofing membranes a thing of the past …
The collateral damages include thousands AS 4654.1 Waterproofing Membranes for External Above Ground Use Testing of tons of wasted building materials, increases in insurance rates, non-renewal of policies, lost productivity, and injured reputations. Every year, building owners, development teams, and their insurers spend hundreds of millions of dollars litigating and repairing water intrusion problems. By doing this Durotech has become the most environmental construction chemical supplier in Australi
Dunlop Pro Rapid Waterproofing
• Multi-purpose use, suitable for all under tile applications. A waterproofing bond breaker is designed AS 4654.1 Waterproofing Membranes for External Above Ground Use Testing to allow normal building movement to be accommodated by a waterproofing membrane. We also have cementitious 2 part membranes that eliminate the need for reinforcement layers, thus saving application time and mess. Depending on the area to be waterproofed, our range includes ready-to-use acrylic and polyurethane membranes that can be applied directly out of the pai
TREMseal Bandage is a TPE flexible sealing tape, is thin and extra-tough elastic strip with considerable longitudinal and lateral extension. TREMproof Torch 4000M is a 4mm thick, APP modified bituminous torch applied waterproofing membrane which is polyester spunbond, with glass filament reinforcement. TREMproof 260 is a polymer-enhanced, single component, fluid-applied, bitumen emulsion, waterproofing membrane.
Tremco Xylol
TREMproof Torch Bitumen Primer is a solvent based modified bitumen primer designed to assist with adhesion of the TREMproof Torch and TREMproof 560A membranes to the substrate. TREMproof 250GC is a rapid curing, high solids, low VOC, moisture cure modified polyurethane waterproofing membrane that can be applied to "Green" (24 hour old) concrete. Polyurethane membranes cure to form an elastic waterproof seal that is free of seams to prevent moisture or water to leach into the surface. Cementitious waterproofing membrane has great adhesion to concrete, cement rendered masonry and fibre-cement sheet, and provides a uniform colour and texture similar to mortar. Vulkem NEM Plus is an Australian made single component, moisture curing, high tensile strength and tough curing polyurethane membran
The low voltage Vertical Surface Scanning roller listed under the guide for testing vertical substrates works by moistening the roller sleeve as AS 4654.1 Waterproofing Membranes for External Above Ground Use Testing the operator rolls the testing tool up the substrate forcing the water before it into any breaches. Given Vector Mapping requires a constant flow of water over a substrate, vector mapping is not able to test vertical substrates – even with an additive in the water to create a film on a given vertical surface, the accuracy is still not reliable. In areas where there are multiple breaches, further testing needs to be undertaken each time until no more breaches are identified. If there are only puddles on the surface, then the circuit would be incomplete resulting in missed breache
Request a free quote today and ensure your surfaces meet national slip resistance requirements. Whether you need wet pendulum testing, on-site slip resistance measurements (AS 4663), or lab testing to AS 4586, our expert technicians deliver accurate, fast, and fully certified reports. At Zerofal, we make the process of completing slip testing for your property easy and fuss free. "I highly, and unequivocally, recommend Zerofal to anyone looking for a professional solution to their slip testing needs
Seams on sheet membranes are also difficult for this method to accurately test as the thickness at the seam is doubled; high voltage current cannot travel laterally through a seam defect. However, not all ELD testing equipment can find breaches on vertical substrates, multiple horizontal breaches in a single test or test semi-conductive coatings – i.e. membranes such as Black EDPM, Black Butynol or polyurethanes tinted with Carbon black. ELD works by creating an electrical field between the membrane surface and a conductive deck or substrate [ie Concrete] which is earthed to the building.
Adhesion Testing
D) Requires temporary dams to be installed to partition off individual wet areas from non-wet areas in buildings, AS/NZS 4858 is the primary Australian standard that relates to the physical performance properties of waterproofing membranes specified for use in wet areas such as bathrooms, kitchens, laundries and wet rooms, to prevent water ingress and protect structures from moisture damage. The thickness readings are obtained by measuring the time taken for the ultrasonic signal to propagate from the probe to the coating/substrate interface and back. Independent Testing Australia (ITA) is equipped with specialised apparatus to test materials and provide data to coating manufacturers, specifiers, builders and waterproofers to determine product suitability for use in the Australian construction industry and satisfy documentation requirements of the Australian Building Code (BCA), the National Construction Code (NCC) and Australian Paint Approval Scheme specifications (APAS). The EFVM® leak detection system makes flood testing waterproofing membranes a thing of the past …