The practical test is simple: add a few drops of food colouring to the cistern water and wait without flushing. Colour appearing in the pan points to the flush valve or siphon. A water level that keeps rising past where it should sit points to the fill valve. Checking both takes two minutes and saves a second visit.

Cracked buttons are the most visible failure, usually caused by repeated heavy-handed pressing on cisterns where the mechanism beneath has already started to stick, forcing the user to press harder to get a result. Replacing a cracked button without addressing a sticking spindle or cable tends to bring the customer back within weeks.

The most common siphon failure is a split or perished diaphragm, which lets water leak back down through the siphon tube even when nobody has touched the lever, producing exactly the slow, unprompted refill that plumbers are used to diagnosing as a running toilet. Unlike a flush valve, a failing siphon usually cannot be repaired with a simple washer replacement in isolation, since the diaphragm is typically moulded as part of a plate that needs to be replaced as a unit.

A cistern that whistles, knocks or hammers while filling is one of the more annoying faults a customer will report, and it is also one of the quicker ones to run down with a short checklist before a plumber even gets to the van. Two causes account for the large majority of noisy-cistern callouts: a worn fill valve and excessive mains pressure, and telling them apart early saves time on site.

See the details at Plumb2U Trade Counter.

Toilet seat hinges look like one of the simplest parts on the whole cistern-and-pan setup, right up until the wrong replacement arrives and will not line up with the holes already drilled into the pan. Two fixing systems dominate the UK market, top-fix and bottom-fix, and they are not interchangeable without redrilling the pan, which nobody wants to do.