A close-coupled cistern bolts directly onto the back of the pan with no visible pipework between the two. Because the outlet on the cistern base sits directly above the inlet on the pan, the flush valve or siphon needs a shorter outlet and often a rubber doughnut washer to seal the joint rather than a length of pipe. Fill valves on close-coupled units tend to be shorter in the body too, since there is less depth inside a compact tank.
Bottom-fix hinges are the traditional arrangement, with a bolt passing down through the pan from above and a nut and washer tightened from underneath the rim. This means access is needed both above and below the pan to fit or remove the seat, which is straightforward on a floor-standing toilet but considerably more awkward on a wall-hung pan where the underside is harder to reach, or where a previous fitting has corroded the nut solid against the porcelain.
Cracked buttons are the most visible failure, usually caused by repeated heavy-handed pressing on cisterns where the mechanism beneath has already started to stick, forcing the user to press harder to get a result. Replacing a cracked button without addressing a sticking spindle or cable tends to bring the customer back within weeks.
A flush valve, by contrast, works as a straightforward seal at the base of the cistern that lifts to let water fall directly through into the pan under gravity, with no siphoning action involved, and shuts again once the float or timer mechanism allows it to reseat. Flush valves are what almost all dual-flush cisterns use, since a siphon's all-or-nothing action makes a genuine short flush difficult to achieve, whereas a valve can simply be held open for a shorter or longer period.
Get the full picture at plumbing boiler spares supplier supplier.
Top-fix hinges solve exactly that access problem by using a bolt and a quick-release or turn-to-tighten fixing that can be adjusted entirely from above the pan, with no need to get underneath at all. This has made top-fix the standard choice on most new soft-close seats sold in the last several years, and it is usually the easier option to specify when the underside of the pan is difficult to reach or when the original fixing has seized.
Bottom-fix hinges are the traditional arrangement, with a bolt passing down through the pan from above and a nut and washer tightened from underneath the rim. This means access is needed both above and below the pan to fit or remove the seat, which is straightforward on a floor-standing toilet but considerably more awkward on a wall-hung pan where the underside is harder to reach, or where a previous fitting has corroded the nut solid against the porcelain.
Cracked buttons are the most visible failure, usually caused by repeated heavy-handed pressing on cisterns where the mechanism beneath has already started to stick, forcing the user to press harder to get a result. Replacing a cracked button without addressing a sticking spindle or cable tends to bring the customer back within weeks.
A flush valve, by contrast, works as a straightforward seal at the base of the cistern that lifts to let water fall directly through into the pan under gravity, with no siphoning action involved, and shuts again once the float or timer mechanism allows it to reseat. Flush valves are what almost all dual-flush cisterns use, since a siphon's all-or-nothing action makes a genuine short flush difficult to achieve, whereas a valve can simply be held open for a shorter or longer period.
Get the full picture at plumbing boiler spares supplier supplier.
Top-fix hinges solve exactly that access problem by using a bolt and a quick-release or turn-to-tighten fixing that can be adjusted entirely from above the pan, with no need to get underneath at all. This has made top-fix the standard choice on most new soft-close seats sold in the last several years, and it is usually the easier option to specify when the underside of the pan is difficult to reach or when the original fixing has seized.